V-5800 N.C. 3-Way Vacuum Piloted Valve

English

CAD-Modellauswahl

Auswählbare Produkte: 18

HELP_VARIABLE


Company	Air Logic
Description	V-5800 N.C. 3-Way Vacuum Piloted Valve
Bill of material	V580028PM
Preview
Product ID	V580028PM V580028PM
Manufacturer Part Number	V580028PM V580028PM
Product Name	V-5800 N.C. 3-Way Vacuum Piloted Valve - V580028PM V-5800 N.C. 3-Way Vacuum Piloted Valve - V580028PM
Product Long Description	Vacuum controlled 3 Way Valves apply signal pressure to a diaphragm that is opposed by a spring force. When then vacuum signal force is greater (deeper vacuum = more force) than the spring force it reaches its set-point (also called “On” pressure), the internal mechanism moves and changes the pneumatic state The signal pressure and pneumatic circuit are completely isolated from each other The pneumatic circuit is normally closed, which means the supply port is closed and the output port is vented through the exhaust to the atmosphere. There is no connection available on the exhaust port When the valve trips, the supply is opened to the output port and the exhaust is off. The valve will remain in this state until the pressure signal drops below its reset point (also called “Off” pressure) The difference between the “On” pressure and the “Off” pressure is defined as the Differential or Hysteresis of the valve Factory preset options are available. Please contact your salesperson or distributor for specifications and a custom part number Adjustments can be made to the switch by removing the round cover and turning the flat head screw. Clockwise adjustments will raise the Set point. Counter clockwise adjustments will lower the setpoint (on pressure). Adjusting preset 3-way valves is not recommended. Do not back out the flat head screw above flush with the body
Part Number Description	Panel Mount 1/8-27 NPS N.C. 3-Way Vacuum Piloted Valve 28" Panel Mount 1/8-27 NPS N.C. 3-Way Vacuum Piloted Valve 28"
valve operation	Normally Cosed - Senses Vacuum/Turns Output ON
port type	Barb for 1/16" I.D. Tubing Barb for 1/16" I.D. Tubing
pressure range	1.5 bar to 8 bar
sensing range	3.5 to 28° Hg 3.5 to 28° Hg
nominal orifice size	2 mm
mounting type	Panel Mount 1/8-27 NPS Panel Mount 1/8-27 NPS
inch metric	Inch
fittings	1/16" & 4 mm Push to Connect 1/16" & 4 mm Push to Connect
air consumption at 6 bar	.7 l/min
wetted material	Buna and Nylon
barb	1/16" 1/16"

Keine Cookies von Drittanbietern unterstützt

V580028PM