Retro-reflective sensors - Ipf Electronic

čeština	Deutsch
English	español
français	português
中文 (繁體)

CAD model selection

Selectable products: 34

HELP_VARIABLE


Company	Ipf Electronic
Description	Retro-reflective sensors
Bill of material	OR180323
IDNR	OR180323 OR180323
Short Description	sensor optical, reflective, M18x1 71long, Polarized red light, Point, Manual adjustment, Sn: 4000, 10-30V DC, PNP Programmable/configurable, Connector M12 4pin, IP67, Brass Nickel-plated+Plastic, With polarizing filter sensor optical, reflective, M18x1 71long, Polarized red light, Point, Manual adjustment, Sn: 4000, 10-30V DC, PNP Programmable/configurable, Connector M12 4pin, IP67, Brass Nickel-plated+Plastic, With polarizing filter
Long Description	Optical sensors function contactlessly. They detect objects independent of their characteristics (e.g., shape, color, surface structure, material). The basic operating principle is based on the transmission and reception of light. There are three different versions: 1. The through-beam sensor consists of two separate devices, a transmitter and a receiver that are aligned with one another. If the light beam between the two devices is interrupted, the switching output integrated in the receiver changes its status. 2. With the retro-reflective sensor, the transmitter and receiver are located in one device. The emitted light beam is reflected back to the receiver by a reflector that is to be mounted opposite the device. As soon as the light beam is interrupted, the switching output integrated in the device changes its status. 3. With the diffuse reflection sensor, the transmitter and receiver are in one device. The emitted light beam is reflected by the object that is to be detected. As soon as the receiver detects the reflected light, the switching output integrated in the device changes its status.
Product ID of the Manufacturer	OR180323 OR180323
Delivery Time	2 2
Display	LED display LED display
Version
Type of alarm output
Type of switching function	Programmable/configurable Programmable/configurable
Type of electrical connection	Connector M12 Connector M12
Features
Type of switching output	PNP PNP
Housing coating	nickel-plated nickel-plated
Design	Cylinder, screw-thread Cylinder, screw-thread
IO-Link version
Setting procedure	Potentiometer Potentiometer
Short-circuit protection	Yes Yes
Light source	Polarized red light Polarized red light
Light beam form	Point
Degree of protection (IP)	IP67 IP67
Scanning function	Light-/dark-on mode Light-/dark-on mode
Reverse polarity protection	Yes Yes
Volume
Material of optical surface	Plastic Plastic
Housing material	Brass Brass
Output functions	Switching point Switching point
Thread dimension	M18 M18
Material of cable sheath
Absolute repeat accuracy
Decay time	1ms 1ms
Number of cores
Wire cross section
Response/decay time	1ms 1ms
Rated switching current	100mA 100mA
Sensor diameter	18mm 18mm
Readiness delay
Thread length	36.5mm 36.5mm
Width
Thread pitch	1mm 1mm
Sensor width
Reaction time
Height
Cable length
Number of pins	4 4
Line diameter
Turn-off delay
No-load current	15mA 15mA
Operating voltage (AC 50Hz)
Vibration resistance
Min. object size
Length	65.1mm 65.1mm
Maximum tightening torque
Light spot diameter at focal point
Turn-on delay
Residual ripple
Shock resistance
Switching frequency	500Hz 500Hz
Voltage drop	2V 2V
Clock frequency of the transmitter
Wavelength of the sensor	880nm 880nm
Storage temperature
Operating voltage (DC)	10 - 30 10 - 30
Switching distance	200 - 4,000 200 - 4,000
Ambient temperature	-25 - 55 -25 - 55
Last update	11/02/2023
Article view	Article view
Product data sheet	Product data sheet

No Third-party Cookies supported

OR180323