Radial fan FRv 125/140 - Radial fan

Deutsch	English

CAD model selection

Selectable products: 16

HELP_VARIABLE


Company	Funken
Description	Radial fan FRv 125/140 - Radial fan
Bill of material	20001367(0Rechts1)
Article number	20001367 20001367
Type	FRv 125/140/4/R/D/EX FRv 125/140/4/R/D/EX
Weight	15 15	kg
Flow	40 - 380 40 - 380	m^3/h
Pressure difference	140 - 60 140 - 60	Pa
Safety type	EEx eb II T 3 EEx eb II T 3
Number of poles	4 4
Sync. RPM. at 50 Hz	1500 1500
From 10 Hz	Not possible Not possible
To 60 Hz	Not possible Not possible
Engine power	0,12 0,12	kW
Rated current (A) at 400V / 50Hz or 230V / 50Hz	0,48 0,48
Size	63 63
Design type	B5/IP55
Housing positions
Info text	Information Info text
Specification	Radial Fan FRv 125/140 for conveyance of aggressive, optionally explosive air, vapours and mist with a content of dust less than 5 mg/m³ and a temperature of -5 to +40°C. Maximal allowable environmental temperature of +40°C. Housing made from PPs injection moulded with integrated maintenance-free seal-system, consisting of a labyrinth seal with externally refillable grease-barrier, for ex-version additionally with lip-seal. Splinter protection around the housing coil. Condensate runoff support at the lowest point of the housing. Secure sealing between the single components to ensure leakage-free installation. High-performance impeller with backward bend blades made from PPs injection moulded with rear blade rows for a guaranteed negative pressure on the axle lead-through in service. Base frame made of galvanised steel with front housing support for increased stability and precise justification of the inlet nozzle and impeller. Direct drive by an IEC-34 three-phase motor with heat resistant connection parts on the housing and impeller to avoid deformation due to a technical breakdown.
Bestellnummeralt	1001469 1001469

No Third-party Cookies supported

20001367(0Rechts1)