??
Catalog navigation
CAD model selection
Selectable products: 4
HELP_VARIABLE
Company
Ipf Electronic
Description
Pressure switch - DW16
Bill of material
DW16460J
IDNR
Short Description
Long Description
Pressure sensors are suitable for measuring different media with high accuracy. They are available with switching output and/or analog output. Using PC software, the measured values can be recorded depending on the device type. These sensors can be used in all areas of e.g. pneumatic and hydraulic applications.
Product ID of the Manufacturer
Delivery Time
2
Display
LED display
Type of switching function
Normally closed contact/normally open contact
Type of electrical connection
Connector M8
Type of process connection
G1/8 inch A / M5 inner
Type of switching output
PNP
Design
Cylinder plain
Setting procedure
Parameterization
Suitable media
Neutral gases
IO-Link version
V1.1
Short-circuit protection
Yes
Measuring display
Relative
Measurement method
Relative
Degree of protection (IP)
IP65
Reverse polarity protection
Yes
Housing material
Plastic ABS
Sensing element material
Nickel-plated brass
Output functions
Switching point
Response/decay time
2.5ms
Number of switching outputs
2
Rated switching current
250mA
Readiness delay
5,000ms
Sensor diameter
16mm
Thread length
7mm
Thread pitch
0.91mm
No-load current
15mA
Length
79mm
Max. operating pressure
Nominal pressure
Number of pins
4
Relative linearity deviation
0.5%
Relative repeat accuracy
0.2%
Residual ripple
10%
Switching frequency
200Hz
Voltage drop
2V
Temperature drift over entire measuring range
3%
Initial setting
Turn-off delay
0 - 999
Operating voltage (DC)
10 - 30
Turn-on delay
0 - 99.9
End setting
Measuring range pressure
Ambient temperature
-10 - 60
Last update
11/02/2023
Article view
Article view
Product data sheet
Product data sheet
Previews
3D
Dimension
2D
Download CAD models