Frequency control unit - Control Units

Deutsch	English

CAD model selection

Selectable products: 7

HELP_VARIABLE


Company	Rhein-Nadel-Automation
Description	Frequency control unit - Control Units
Bill of material	31004175
Type	ESR 2500 CSA ESR 2500 CSA
Article No.	31004175 31004175
specification	110-230V/50-60Hz
One power output for vibratory bowl and linear feeder	x
automatic adjustment of the vibration frequency after calibration	x x
Automatic switching to 230V or 110V mains voltage
Membrane keypad for setting and changing the working values in the setting menus	x
Simple menu navigation to change the setting parameters	x
Manual adjustment ot the transient and decay responses by changing the time constants	x
External activation 24V DC	x
One relay output and one optocoupler for status messages and fruther links	x
Two relay output and two optocoupler for status messages and fruther links	x x
Three optocouplers for status messages and further links	x x
Messages from the control unit: active = controller running	x
Messages from the control unit: Operational = controller switched on	x x
Messages from the control unit: Operational = controller switched on	x x
Possibility of connecting external devices e.g. solenoid valve	x
Possibility of connecting external devices e.g. solenoid valve (preferably 230V AC)	x x
Connection of one sensor (supply voltage 24V DC 10mA)
Connection of maximum two sensors	x x
Plug-in connections for RNA vibratory bowl and linear feeders	x
self-protecting (max. current monitoring)	x
Double-pole main switch	x
CE and EMV tested	x
CE EMV and UL tested	x x
Automatic calibration (´control unit "learns")	x x
Activation of vibratory bowl and linear feeder: vibration amplitude	x
Activation of vibratory bowl and linear feeder: external release	x
Activation of vibratory bowl and linear feeder: signal direction of external release	x
Activation of vibratory bowl and linear feeder: Soft start time and soft stop time	x
Activation of vibratory bowl and linear feeder: frequency manually adjustable
Storing the programmed settings (number of storage locations)	11 11
Setting sensor input 1 and sensor input 2: Inverting input of signal direction
Setting sensor input 1 and sensor input 2: Time until switching on and switching off moment	x x
Setting sensor input 1: Inverting input of signal direction
Setting sensor input 1: Time until switching on and switching off moment	x x
Selecting the sensor links (up to 7 possibilities)	x x
Setting the cycle monitors (monitoring of sensors 1 and / or 2)
Locking the settings against changes	x
Status display	x x
Status Display (control of the vibration amplitude)
Status Display (calibration and operation values)	x x
Permanently programmed application examples
Performance target with external voltage	x x
Performance target with external voltage of 10V DC	x x
Resetting to RNA factory setting	x

No Third-party Cookies supported

31004175