Eden - Non-contact safety sensor - ABB Low Voltage & Systems

English

Селекция на CAD модел

Налични продукти: 17

HELP_VARIABLE


Company	ABB Low Voltage & Systems
Description	Eden - Non-contact safety sensor
Bill of material	ABB - 2TLA020051R5200 + Adam DYN-Status M12-5 contact
Product ID	2TLA020051R5200 2TLA020051R5200
Extended Product Type	Adam DYN-Status M12-5 Adam DYN-Status M12-5
Invoice Description	Adam DYN-Status M12-5 contact Adam DYN-Status M12-5 contact
Description	Adam safety sensor with DYNlink signal and StatusBus. M12-5 male connector. Adam safety sensor with DYNlink signal and StatusBus. M12-5 male connector.
Long Description	Eden is a non-contact safety sensor used as interlocking device for e.g. doors and safe position monitoring. Adam safety sensor with DYNlink signal and StatusBus. Used with an Eva actuator to form a non-contact safety sensor Eden. M12-5 male connector. Four pieces of DA 1B distance plates and four pieces of DA 2B distance rings are included. Adam senses the presence of Eva without mechanical contact and therefore without any wear. The compact size of Eden and its 360°mounting possibility make it easy to use in most applications. Eden is UL approved for use in US and Canada. Eden is a non-contact safety sensor used as interlocking device for e.g. doors and safe position monitoring. Adam safety sensor with DYNlink signal and StatusBus. Used with an Eva actuator to form a non-contact safety sensor Eden. M12-5 male connector. Four pieces of DA 1B distance plates and four pieces of DA 2B distance rings are included. Adam senses the presence of Eva without mechanical contact and therefore without any wear. The compact size of Eden and its 360°mounting possibility make it easy to use in most applications. Eden is UL approved for use in US and Canada.
International product number	7350024480313 7350024480313
Product number of the Manufacturer	2TLA020051R5200 2TLA020051R5200
Number of semiconductor outputs with signalling function	1 1
Number of contact energized outputs with signalling function	0 0
Type of actuation	Transponder Transponder
Type of interface for safety communication	Other Other
Type of electric connection	Connector M12 Connector M12
Type of switching output	Other Other
Width sensor	30 30	mm
Height of sensor	75.2 75.2	mm
Length of sensor	12 12	mm
Explosion safety category for gas	None None
Explosion safety category for dust	None None
Construction type housing	Special construction Special construction
Material housing	Plastic Plastic
Coating housing	Uncoated Uncoated
Protected switch distance OFF	25 25	mm
Protected switch distance ON	10 10	mm
SIL according to IEC 61508	3 3
Performance level according to EN ISO 13849-1	Level e Level e
Max. output current at protected output	0.05 0.05	mA
EFI02386	- - -
Ambient temperature	-40 - 80 -40 - 80	°C
Mechanical mounting condition for sensor	Not flat Not flat
Rated supply voltage at AC 50 Hz	- - -	V
Rated supply voltage at AC 60 Hz	- - -	V
Rated supply voltage at DC	24 - 24 24 - 24	V
Voltage type	DC DC
Cross-/short circuit identification possible	true true
Switching distance	15 15	mm
With monitoring function downstream switching devices	false false
Suitable for safety functions	true true
With status indication	true true
Degree of protection (IP)	IP67 IP67
Customs tariff number	8536508099 8536508099
Deeplink product page	Link to product detail page
Type	Adam DYN-Status M12-5 Adam DYN-Status M12-5

Не се поддържат бисквитки на трети страни

ABB - 2TLA020051R5200 + Adam DYN-Status M12-5 contact