Actun OPTI-MS

čeština	dansk
Deutsch	English
español	suomi
français	italiano
Nederlands	polski
português	русский
slovenščina	svenska

CAD model selection

Selectable products: 31

HELP_VARIABLE

Company

Wilo

Description

Actun OPTI-MS

Bill of material

6090334

Produktabbildung

Article number

6090334

Type code

Actun OPTI MSI4.02-40

Manufacturer

WILO SE

Level Of Detail

Short text

Multistage submersible pump in tie strap version (MSI) or as helicoidal rotor pump (MSH) for for vertical or horizontal installation

Tender text

Fully submersible, multistage submersible pump as a centrifugal pump in sectional construction with integrated non-return valve for pumping process water. A corrosion-free, encapsulated permanent magnet motor with water-glycol filling and integrated frequency converter is used as the drive. The permanent magnet motor is hermetically sealed with enamel-insulated windings, resin-impregnated and with self-lubricating bearings. The integrated frequency converter allows operation using either direct current or alternating current power sources. The Actun OPTI-MS pump is therefore especially suitable for operation with solar power. In applications with solar modules, the integrated software algorithm MPPT (“Maximum Power Point Tracking”) allows the available power to be matched in order to maximise the pumped volume flow (dynamic MPPT). The unit can be installed in a vertical or horizontal position. The motor is cooled by the pumped fluid. Therefore, the unit must always be operated immersed. The limit values for maximum fluid temperature, minimum flow velocity and voltage ranges must be adhered to. Vertical installation is possible, depending on the design with or without cooling shroud. In cases of horizontal installation, a cooling shroud must always be provided. Scope of delivery *Submersible pump with connection cable *Casting resin cable connector with integrated water level sensor *Installation and operating instructions

Product description

Actun OPTI MSI4.02-40

ETIM Class (EC)

EC010343

Pump casing material

Stainless steel

Quality class of pump casing

X5CrNi18-10

Material pump wheel

Stainless steel

Material pump wheel

X5CrNi18-10

Volume flow rate (BEP)

2.1650

m³/h

Head at flow rate (BEP)

2565.43

kPa

Max. discharge flow

3.557

m³/h

Max. static height

375.50

Max. operating pressure

25.0

bar

Electrical connection

Terminals

Cable length

2.5

Rated voltage

230.000

Number of phases

1.000

Frequency

50. 60. – (DC)

Nominal current

22.0

Motor power output (P2) per motor

4.0

Insulation class acc. to IEC

Rotational speed

3600.0

1/min

Motor speed control

Type of speed control

Medium temperature (continuous)

3.0

°C

Connection outlet side

Screwed connection inner thread;Rp1¼-PN10/16/25/40

Diameter of connection on delivery side

Rp 1¼

Outer pipe diameter connection outlet side

Flange compression stage connection outlet

PN 10/16/25/40

bar

Connection standard outlet side

Flange shape

No connection

With non-return valve

yes

Pump diameter

99.0

Pump and motor length

1835.0

Immersing depth

150.0

Min. drill hole diameter

99.0

Max. sand content

50.0

g/m³

Max. electrical switching cycles

Nominal operating mode

Weight

33.0

Degree of protection (IP rating)

IP68

Cable type

S07BBH2-F

Cable type

Cable construction

4G1.5 + 2G0.75

mm²

Cable construction

Angle to first bolt hole

Thickness flange (incl. sealing edge)

Diameter bolt hole

Diameter sealing edge

0.000

Dimensions

90.000

Outer diameter of flange

Dimensions

7.3

Max. diameter

Dimensions

Rp 1¼

Outer pipe diameter connection

Thickness sealing edge

Dimensions

1030.0

Dimensions

0.0

Dimensions

488

Dimensions

1347

Dimensions

Pitch circle

Dimensions

1835

Number of bolt holes

Dimensions

45.8

Number of cables

No Third-party Cookies supported

6090334