RSHE - Imperial

CAD model selection

Selectable products: 53

HELP_VARIABLE


Company	Smalley
Description	RSHE - Imperial
Bill of material	RSHE-143-CSOP-TW
Part No.	RSHE-143-CSOP-TW RSHE-143-CSOP-TW
no.	143 143
Application Diameter	1.438 1.438	Inch
d1 frac	1 7/16 1 7/16
Ring Thickness	0.050 0.050	Inch
Ring Thickness Tolerance Up	0.002 0.002	Inch
Ring Thickness Tolerance Down	-0.002 -0.002	Inch
Ring Diameter	1.596 1.596	Inch
Ring Tolerance Up	0.025 0.025	Inch
Ring Tolerance Down	-0.020 -0.020	Inch
Lug Height (INCH)	0.201 0.201	Inch
Lug Height Tolerance Up	0.006 0.006	Inch
Lug Height Tolerance Down	-0.006 -0.006	Inch
Radial Wall	0.133 0.133	Inch
Ring Radial Wall Tolerance Up	0.006 0.006	Inch
Ring Radial Tolerance Down	-0.006 -0.006	Inch
Taper Width (INCH)	0.065 0.065	Inch
CTOLUP	0.006 0.006	Inch
CTOLDWN	-0.006 -0.006	Inch
Lug Inside Diametaer (INCH)	0.078 0.078	Inch
Lug ID Tolerance Up	0.015 0.015	Inch
Lug ID Rolerance DOWN	-0.002 -0.002	Inch
Groove Diameter	1.528 1.528	Inch
Groove Diameter Tolerance Up	0.004 0.004	Inch
Groove Diameter Tolerance Down	-0.004 -0.004	Inch
Groove Width	0.056 0.056	Inch
Groove Width Tolerance Up	0.004 0.004	Inch
Groove Width Tolerance Down	0.000	Inch
Edge Margin	0.135 0.135	Inch
Groove Yield	5500 5500	lb
Ring Shear	10353 10353	lb
Max chamfer/radius	0.038 0.038	Inch
Ring Shear @ Max Chamfer/Radius	2,4 2,4	Inch
Pliers Straight	J2 J2
Pliers Bent	J21 J21
Material	Spring steel SAE 1074 Spring steel SAE 1074
Hardness	Scale C 47 ÷ 52 Scale C 47 ÷ 52
Finish Type	phosphated and oiled
Base Extrude	2 2
Type	Internal
Smalley Series	Tapered Section
Delivery Country	These products are only available in the USA

No Third-party Cookies supported